+65 8321 5128 sales@dronesingapore.sg 157 Mei Ling St, #01-72A, Singapore 140157

Mini Cart

iFlight Protek25 Pusher HD SucceX-D 20A F4 Whoop AIO V3.2 4S 2.5 Inch FPV Racing Drone BNF w/ Polar Vista Digital System sub 250g – BNF-DJI

$452.39$492.14

Introduction:
After our big success with the iFlight ProTek series, we are now happy to announce another member. The ProTek25 Pusher!
Aiming for pilots looking for less weight but great durability, maximum performance but long distance and flight time.
A lot of thought was put into creating the best light pusher style 2.5inch quad on the market.
Cinematic as well as light freestyle is where this rig feels home. Cruising through the smallest gaps, chasing skateboards or just for fun in your backyard.

– Durable aerodynamic PP body and carbon two-piece frame construction
Only 8 screws to detach the main plastic body from the carbon frame, motors and electronics. Quick, easy, and cheap repair or customization!

– Reversed Pusher-style design for enhanced thrust and efficiency
Propeller thrust can travel without any disturbance of frame or wires; Increased flight time, less noise, and less prop wash!

– Powerful XING 1404 motors
Lightweight, efficient and maximum power for its size; More than enough thrust for cruising and acromode flying without restriction!

– Less than 250g weight including 4S 650mAh battery and naked Hero8

Specification

Frame
Wheelbase: 108mm
Body Size: 76.3*76.3mm
Top plate thickness: 3mm
Top and bottom plate spacing: 21mm (aluminum standoff height)

SucceX-D Whoop AIO V3.2 FC AIO ESC
Size:41*41mm
Mounting pattern:25.5*25.5mm/φ3mm
Connector:Micro-USB
MCU:STM32F411
Gyro:MPU6000
OSD: IFLIGHT OSD (AT7456E)
Blackbox:16Mb Onboard Flash
BEC output:5V 2.5A
Barometer: DPS310

Constant current:20A; 30A(Burst)
Input:2-6S
Current sensor: yes
BLHeli: BLHeli-S
ESC Telemetry: no
Target:IFLIGHT_F411_AIO
ESC Firmware: G-H-30 BL

XING 1404 5500KV Motor
Configuration: 9N12P
Shaft Diameter: 1.5mm
Motor Dimensions(Dia.*Len): Φ18.3×12.5mm
No.of Cells(Lipo): 2-4S
Max Continuous current(A): 11.8A
Max Continuous Power(W): 174.6W
Internal resistance: 0.28Ω
Weight: 8.5g(without cable)
Mounting pattern: 9*9*φ2mm
Bearing: 5*2*2.5mm

Nazgul 2525 propeller
Quantity: 2 CW & 2 CCW

Recommend Lipo Battery ( NOT Included)
iFlight Fullsend 4S 650mAh xt30 ( 3-5mins, for gopro naked; 5-7mins without)
iFlight Fullsend 4S 850mAh xt30 ( 5-7mins, for gopro naked; 6-8mins without)

Package Included:
pre-built and tested Quadcopter
1x iFlight ProTek25 Pusher Frame
1x Caddx Nebula Nano Digital HD System Kit
1x iFlight ipex/UFL LHCP 5.8g antenna
2x iFlight Nazgul 2525 propeller CW
2x iFlight Nazgul 2525 propeller CCW
1x 15x150mm battery strap
1x 15x180mm battery strap

Model

Clear
SKU: N/A Category:

Description

Introduction:
After our big success with the iFlight ProTek series, we are now happy to announce another member. The ProTek25 Pusher!
Aiming for pilots looking for less weight but great durability, maximum performance but long distance and flight time.
A lot of thought was put into creating the best light pusher style 2.5inch quad on the market.
Cinematic as well as light freestyle is where this rig feels home. Cruising through the smallest gaps, chasing skateboards or just for fun in your backyard.

– Durable aerodynamic PP body and carbon two-piece frame construction
Only 8 screws to detach the main plastic body from the carbon frame, motors and electronics. Quick, easy, and cheap repair or customization!

– Reversed Pusher-style design for enhanced thrust and efficiency
Propeller thrust can travel without any disturbance of frame or wires; Increased flight time, less noise, and less prop wash!

– Powerful XING 1404 motors
Lightweight, efficient and maximum power for its size; More than enough thrust for cruising and acromode flying without restriction!

– Less than 250g weight including 4S 650mAh battery and naked Hero8

Specification

Frame
Wheelbase: 108mm
Body Size: 76.3*76.3mm
Top plate thickness: 3mm
Top and bottom plate spacing: 21mm (aluminum standoff height)

SucceX-D Whoop AIO V3.2 FC AIO ESC
Size:41*41mm
Mounting pattern:25.5*25.5mm/φ3mm
Connector:Micro-USB
MCU:STM32F411
Gyro:MPU6000
OSD: IFLIGHT OSD (AT7456E)
Blackbox:16Mb Onboard Flash
BEC output:5V 2.5A
Barometer: DPS310

Constant current:20A; 30A(Burst)
Input:2-6S
Current sensor: yes
BLHeli: BLHeli-S
ESC Telemetry: no
Target:IFLIGHT_F411_AIO
ESC Firmware: G-H-30 BL

XING 1404 5500KV Motor
Configuration: 9N12P
Shaft Diameter: 1.5mm
Motor Dimensions(Dia.*Len): Φ18.3×12.5mm
No.of Cells(Lipo): 2-4S
Max Continuous current(A): 11.8A
Max Continuous Power(W): 174.6W
Internal resistance: 0.28Ω
Weight: 8.5g(without cable)
Mounting pattern: 9*9*φ2mm
Bearing: 5*2*2.5mm

Nazgul 2525 propeller
Quantity: 2 CW & 2 CCW

Recommend Lipo Battery ( NOT Included)
iFlight Fullsend 4S 650mAh xt30 ( 3-5mins, for gopro naked; 5-7mins without)
iFlight Fullsend 4S 850mAh xt30 ( 5-7mins, for gopro naked; 6-8mins without)

Package Included:
pre-built and tested Quadcopter
1x iFlight ProTek25 Pusher Frame
1x Caddx Nebula Nano Digital HD System Kit
1x iFlight ipex/UFL LHCP 5.8g antenna
2x iFlight Nazgul 2525 propeller CW
2x iFlight Nazgul 2525 propeller CCW
1x 15x150mm battery strap
1x 15x180mm battery strap

Additional information

Model

BNF-DJI, Frsky R-XSR receiver, TBS Crossfire Nano RX

Reviews

There are no reviews yet.

Be the first to review “iFlight Protek25 Pusher HD SucceX-D 20A F4 Whoop AIO V3.2 4S 2.5 Inch FPV Racing Drone BNF w/ Polar Vista Digital System sub 250g – BNF-DJI”

Your email address will not be published. Required fields are marked *

Model

Clear